图片名称

How are industrial robots programmed?

2021-09-15


How are industrial robots programmed?


1. Programming method introduction: the factory uses more or teach-in programming, the teach-in is to demonstrate first, which means that to take a step of the program first manually move the industrial robot to this position and record the trajectory, it forms a single-step program, and multiple such programs form a running trajectory program.
  
2. Introduction to teach-in programming: also known as point-to-point teaching programming, it is to record the formation trajectory of these "points" by forming a line at two points and forming a circle at three points.
  
Truss robot
  
3. Industrial robot programming is not difficult to solve: the robot mentioned above roughly talked about its programming method, which is nothing more than point-to-point programming, recording the coordinates of these points, forming a motion trajectory, as long as the operator wants to go where, use the control button to manually move to these position points to enter the trajectory, you can maintain this movement trajectory. It's very simple.
  
4. Manipulator programming has no requirements for learners: no requirements, complete the country's nine-year compulsory education is not very stupid and can basically learn, there are not many requirements for academic qualifications and experience, of course, the higher the education, the more experience must be better, without these it doesn't matter, as long as you are willing to learn to learn robot programming operations.
  
5. How long can you learn manipulator programming: After buying a stamping manipulator, the manufacturer will train workers, and how long you can learn depends on the person. In the end, everyone is an independent individual and different, but from the experience of the truss robot, you can basically operate it yourself after about two days of learning.

 


Copyright © 2023 Shenyang Weiding Robot Co., Ltd  Powered by 300.cn  shenyang.300.cn  SEO   license

Service

Hotline

024-86152964